Minibeast
Minibeast one of the cheapest magnetic drills..
Simple design and relatively low construction allows easy handling even under extreme conditions. Despite its small size it is fitted with an engine powerful enough to drill holes with a diameter up to 35 mm.
- weight 10 kg
- Max. Ø core bits 35mm
- Max. drilling depth 50 mm
- Max. Ø spiral drill 12 mm
- Performance motor 1010 watt
- speed 350ot./min
- Size mag. legs 80x160mm
Ask us for information at:info@alltools.sk
or +421907708701
Producers:
MagBeast 5
The strongest magnetic drill in the world
The strongest magnetic drill in the world. Strong and sturdy construction extremely powerful 3000W motor and a holding force up to 1.3 tons allow you to drill holes up to 200 mm to 152 mm depth of the borehole. Machine capable of cutting up to M52 thread.
- Weight 53 kg
- Max. Ø core bits 200 mm
- Max. drilling depth 52 mm
- Max. Ø helical drill 52 mm
- Maximum thread size M52
- Max. Ø countersink 110 mm
- Power 3000 W
- Speed 8-60,62-130,100-210,216-450
- four-speed gearbox with variable speed
Ask us for information at:info@alltools.sk
or +421907708701
Producers:
NKO MACHINES UZ12
Device for chamfering the weld the flat sheet.
Ultralight UZ12 machine is one of the lightest beveling machine in the market. Thanks to its compact size and light weight is ideal not only to shop floor operations, but also for the assemblage. Ovemore, machine is equipped with an automatic movement shift. Working with UZ12 Ultralight is then quite comfortable. Quietest machine on the market at all.
- Measures: 470x294x523 mm
- Max. bevel width: 12 mm
- The taper angle: 30 °, 45 °, 22.5 °, 37.5 °, 50 ° (exchangeable KIT)
- The thickness of the bevel material: 3-35 mm
- Engine: 400W, 380V / 50Hz
- Movement: 1.8 m / min.
- Weight: 30 kg
Ask us for information at:info@alltools.sk
or +421907708701
Producers: 
NKO MACHINES UZ 50
Device for chamfering the weld the flat sheet.
3 Beveller in one machine + 3D = adaptive system - unique solution created and manufactured in the Czech Republic.
Automatic shift operation with possibility of continuous adjustment of the movement speed in the range of 0 to 1.2 m / min. High Speed Milling Tool with cutting inserts with extended durability, maximum width of bevelled edges 62 mm / 50 mm 15 ° / 45 °. Variable setting of desired angle between 15 ° -60 ° without necessity to change any part. Material thickness: 7-70 mm.Unique 3D MANIPULATOR - unique design manipulator offers the possibility of simple turning beveling machine of 180 degrees for making two-sided bevel X, K. For rotation no tools are necessary. Eliminating need of manipulation with the material = big saving time.
- Material: carbon steel, stainless steel, aluminum, Hardox and Weldox, Duplex
- Material thickness: 7-70 mm
- Minimum workpiece dimensions: 200 x 100 x 7 mm, with
- preparation for small workpieces
- The maximum size of the material: no limitations
- Drive – engine power: 4000 W / 400 V / 3-phase / 50Hz
- Cutting speed: 182.92 m / min (about 85 mm cutters, cutting blades 5)
- Movement drive - power: 2 engines, power 120W / 400V / 3-phase / 50Hz automatic, with frequency converter, controlled movement drive with adjustable feed speed from 0 to 1.2 m / min according to optimal cutting conditions
- Weight UZ50 + 3D MANIPULATOR: 175 kg
Ask us for information at:info@alltools.sk
or +421907708701
Producers:
NKO MACHINES B15 AIR
Device for chamfering the weld on shape and the flat sheet.
Designed for beveling shaped parts, inner and outer radius and holes. Specially developed for the production of fair-faced bevel and preparation for welding. Powerful pneumatic drive for extreme load.
- The taper angle: changeable head 30 °, 37.5 °, 45 °, 50 °, 60 ° - other angles on demand
- Bevel width: 0-15 mm <400N / mm 2 - 0-8 mm> 400 N / mm 2
- Engine: Pneumatic
- Engine power: 2984 W
- Operating speed: 6000 rpm
- Air consumption: 750 l / min
- Working pressure: 6 bar
- Weight: approx 7.5 kg
- Number of milling plates: 6 pieces
Ask us for information at:info@alltools.sk
or +421907708701
Producers:
Pipe beveler, N.KO Machines
device for beveling pipes
The units are designed for beveling tubes and pipes of different diameters, thicknesses, and materials. Due to different types of clamping and drive are applicable to any piping works. They are characterized by high efficiency and simple operation with small operating costs.
- Drive: electric, pneumatic.
- Tube dimensions: depending on machine type.
Ask us for information at:info@alltools.sk
or +421907708701
Producers:
Magnetic Drill SMD351L-NKO MACHINES
One of the cheapest magnetic drills.
Long-time tested, solid, simple construction and easy operation. It is possible to use the core, as well as classic twist drills.
- Drilling with core drills d 12 to 35 mm
- double lift
- Max. depth drilling with core drill 50 mm
- Speed under load: 270 rpm. / min
- Shaft: 19 mm
- Magnetic holding force: 17000 N
- Performance: 1.1 kW
- Voltage: 230 V
- Dimensions (W x L xD ) 300 x 230 x 420 mm
- Weight: 14 kg
Ask us for information at:info@alltools.sk
or +421907708701
Producers:
TRUMPF TSC 100
Device for cleaning grates of flame cutting laser machines.
This machine extedns the life of cutting grates up to 70% by mechanical cleaning system. It is simple device that can be opearated by one person.
- Engine power: 1400W
- Weight: 18 kg
- The thickness of the grate 2 -3.9 mm
- The minimum gap between grates: 33.5 mm
- The maximum thickness of singe: 25 mm
Ask us for information at:info@alltools.sk
or +421907708701
Producers:
TRUMPF TPC 165
A device for cutting sandwich panels
The device is intended for cutting sandwich panels, and windows cutting. Principle of chainsaw ensures long tool life. The device is suitable for cutting all kinds of sandwich panel.
- Engine power: 1400W
- Weight: 9.6 kg
- Maximum thickness of panel: 165 mm
- The minimum size of the square hole: 340 x 340 mm
Ask us for information at:info@alltools.sk
or +421907708701
Producers:
NKO TOOLS - BZ-60UNV
Multifunctional tool for pressing, cutting and punching.
This device excels in versatility and the possibility of widespread use and still has everything in one toolbox. Changing of adapter makes this device become pressing tool of cable ties and mesh, cutter of copper and aluminum cables and punching tool for punching switchboards.
- Pressure: 60kN
- Lift: 42 mm
- Cutting cycle: about 70 cuts
- Cutting range: pr. 40 mm (Cu / Al cable and armored)
- Pressing cycle: approximately 160 pressings
- Pressing range: 16-300 mm2, 10-240 mm2 (Al)
- Punching cycle: about 100 holes
- Punching range: pr. 22.5 to 61.5 mm for standard steel thickness up to 3.5 mm (depending on diameter perforated)
- Voltage: 18V
- Capacity: 3.0 Ah
- Charging time: 120 min
- Weight: 4.8 kg
- Packaging: plastic case
- Not suitable for cutting steel
- ACCESSORIES:
- Stamper diameter: 16, 25, 35, 50, 70, 95, 120, 150, 185, 240, 300 mm2
- Punching tools: 22.5; 28.3; 34.6; 43.2; 49.6; 61.5 mm
- Knives: 1 set
- Adapter for pressing: 1 piece
- Adapter for punching: 1 piece
- Tensile bolt 3/4".16UN: 1pcs
- Tensile bolt 7/16".20UN: 1pcs
- Spacer ring: 1 piece
- Sealing rings of hydraulic roller 3/4 ".16UN: 1 piece
- Sealing rings of safety valve 7/16 ".20UN: 1 piece
- Accumulator: 2 pieces
- Charger: 1 piece
Ask us for information at:info@alltools.sk
or +421907708701
Producers:
GEKA BENDICROP 85 SD
Hydraulic punch with sectional scissors.
This device is designed to punch holes in sheet metal and profiled materials. It is fitted with sectional scissors, die- cutting department and a small edge wring. It is characterized by particularly high effectiveness when creating holes in different materials unlike drilling.
- Punching capacity: 80 tons
- Punching: Ø40 x15mm
- L profile: 120x120x12mm
- Flat steel: 450x15mm
- Logs: Ø45 mm
- Prism: 40 mm
- Bending: 200x12
Ask us for information at:info@alltools.sk
or +421907708701
Producers: 